Adeunis Current:
action, sensorType, current
            
Adeunis Modbus:
action, configDone, lowBattery, hwError, configError, modbusError, counter, keepAlivePeriod, periodicDataPeriod, samplingPeriod, supplyTime, retryCount, busType, stopBit, parity, baudRate, Ea+, rEa+, totalConsumption, vendor, alarmType, slaveAddress, alarmRegisterAddress, alarmRegisterName, alarmRegisterValue, alarmRegisterValueStr, registerValue, requestStatus, registerId, modbusRegisterValue1, modbusRegisterValue2, modbusRegisterValue3, modbusRegisterValue4, modbusRegisterValue5, modbusRequestStatus, dlFrameCode
            
Adeunis Dry Contacts:
action, configurationDone, lowBattery, hardwareError, frameCounter, productMode, keepAlivePeriod, transmitPeriod, channelAType, channelAEdge, channelADebounceDuration, channelBType, channelBEdge, channelBDebounceDuration, channelCType, channelCEdge, channelCDebounceDuration, channelDType, channelDEdge, channelDDebounceDuration, channelAValue, channelACurrentState, channelAPreviousFrameState, channelBValue, channelBCurrentState, channelBPreviousFrameState, channelCValue, channelCCurrentState, channelCPreviousFrameState, channelDValue, channelDCurrentState, channelDPreviousFrameState, sigfoxRetry, registerValue, request_status, register_id, leakageStatus
            
AirIM-100 1.0:
action, voltage, current, temperature, humidity, firmware, first_message, flood_detected, button_pressed, reed_on, tamper_open, low_batery, counter
            
Adeunis Puls:
action, configurationDone, lowBattery, hardwareError, configurationInconsistency, frameCounter, productMode, numberOfHistorizationBeforeSending, samplingPeriod, calculatedSendingPeriod, flowCalculationPeriod, channelAState, channelAType, channelADebouncingPeriod, channelATamperActivated, channelBState, channelBType, channelBDebouncingPeriod, channelBTamperActivated, channelALeakageDetectionOverflowAlarmTriggerThreshold, channelBLeakageDetectionOverflowAlarmTriggerThreshold, channelALeakageDetectionThreshold, channelBLeakageDetectionThreshold, channelALeakageDetectionDailyPeriodsBelowWhichLeakageAlarmTriggered, channelATamperSamplePeriodForDetection, channelATamperThreshold, channelBLeakageDetectionDailyPeriodsBelowWhichLeakageAlarmTriggered, channelBTamperSamplePeriodForDetection, channelBTamperThreshold, sigfoxRetry, channelAFlowAlarm, channelAFlowLast24hMin, channelAFlowLast24hMax, channelATamperAlarm, channelALeakageAlarm, channelBFlowAlarm, channelBFlowLast24hMin, channelBFlowLast24hMax, channelBTamperAlarm, channelBLeakageAlarm, channelACounterValue, channelBCounterValue, channelAFlowValue, channelBFlowValue, channelAFlowValueT0, channelAFlowValueT1, channelAFlowValueT2, channelAFlowValueT3, channelBFlowValueT0, channelBFlowValueT1, channelBFlowValueT2, channelBFlowValueT3, registerValue, request_status, register_id
            
Chipfox GPS 1.0:
action, isLast, fixTime, temperature, idleVoltage, txVoltage, timeout, battery
            
Adeunis Temp:
action, configDone, lowBattery, hwError, configError, numberOfSensors, counter, keepAlivePeriod, periodicDataPeriod, historyPeriod, samplingPeriod, redundantSamples, retryCount, tempS1, tempS2, tempS1T-1, tempS2T-1, tempS1T-2, tempS1T-3, tempS1T-4, tempS1T-5, tempS2T-2, alarmS1, alarmS2, registerValue, request_status, register_id
            
ATOZ Button:
action, mac1, mac2
            
GPS Tracker 1.0:
action, isLast, fixTime, temperature, idleVoltage, txVoltage, timeout, battery
            
Adeunis Analog:
action, configurationDone, lowBattery, hardwareError, alarmChannelA, alarmChannelB, frameCounter, productMode, transmissionPeriodKeepAlive, transmissionPeriodData, channelAType, channelAThreshold, channelADebounceDuration, channelAExternalTriggerType, channelBType, channelBThreshold, channelBDebounceDuration, channelBExternalTriggerType, channelAThresholdHighValue, channelAThresholdHighHysteresis, channelBThresholdHighValue, channelBThresholdHighHysteresis, channelAThresholdLowValue, channelAThresholdLowHysteresis, channelBThresholdLowValue, channelBThresholdLowHysteresis, sigfoxRetry, channelAVoltage, channelBVoltage
            
GPS Tracker 2.1:
action, moving, mode, fixTime, temperature, voltage, battery, firmware, interval, timeoutlimit, interval2, timeoutlimit2
            
Airwits CO2 5.1:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, co2, autoCalibration, zeroPintAdjusted
            
Chipfox GPS 2.1:
action, moving, mode, fixTime, temperature, voltage, battery, firmware, interval, timeoutlimit, interval2, timeoutlimit2
            
Airwits R4.1:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, co2, autoCalibration, zeroPintAdjusted
            
Airwits CO2 4.0:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, co2
            
Airwits CO2 6.2:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, co2, co2Baseline, autoCalibration, zeroPintAdjusted
            
Anticimex CO2 5.1:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, co2, renewalFlow, autoCalibration, zeroPintAdjusted
            
Airwits CO2 PLUS 6.2:
action, fwVersion, temperature, humidity, co2, radioZone, hwVersion, deviceType, fwBuild, txVoltage, lastDL, messageCount
            
Anticimex CO2 PLUS 6.2:
action, fwVersion, temperature, humidity, co2, renewalFlow, radioZone, hwVersion, deviceType, fwBuild, txVoltage, lastDL, messageCount
            
Airwits PM:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, pm1_0, pm2_5, pm10_0
            
Airwits IAQ:
action, fullPowerMode, activePowerControl, fwVersion, temperature, humidity, tvoc_min, tvoc_max, tvoc_avg
            
Airwits Detectify R3.2:
action, fullPowerMode, activePowerControl, fwVersion, activityUpdate, activityCount, totalActivityCount
            
WS2:
action, sensorType, logType, range, temperature, lastDownlink, testMessageNumber, totalTestMessages, downlinkReceived, battery, firmware, statusCode, daysOfOperation
            
Ranger:
action, mac1, mac2, mac3, rssi1, rssi2, rssi3, firmware, stationaryCountUnit, stationaryCountValue, contextId, packetCount, packetId
            
FlexSense:
action, temperature1, temperature2, humidity1, humidity2, radioZone, hwRelease, fwBuild, fwRelease, messageCount, batteryVoltage, lastDL
            
Twin Guard R2:
action, temperature1, temperature2, humidity1, humidity2
            
Smart Lock:
action, customerPin, temperature, counter, openedWithPin, pinType, timetoutReached, timetoutWithNewCustomerPin, temperatureLimitReached, temperatureLimitReachedWithNewCustomerPin, doorStatus, lockIsActivated
            
NPGX-SG 1.0:
action, battery, battery_difference, total, rt1, rt2, rt3, t02, t04, t06, t08, t10, t12, isInCorrectPosition, batteryMeasurementType
            
Connected Seal:
action, status, batteryLevel
            
IoT Sensor 1.0:
action, batteryStatus, firstMessage, ch1on, ch2on, ch3on, ch4on, stConf, chConf, kind, temperatureValue, temperatureValue1, temperatureValue2, temperatureValue3, humidityValue, pressureValue, dewPointValue, alarm2Temperature, alarm2Humidity, alarm2Pressure, alarm2Dewpoint, alarm1Temperature, alarm1Humidity, alarm1Pressure, alarm1Dewpoint, frame, alarm2Temperature1, alarm2Temperature2, alarm2Temperature3, alarm1Temperature1, alarm1Temperature2, alarm1Temperature3
            
NH3 sensor:
action, HwNH3Error, alertType, nh3, nh3Min, nh3Avg, nh3Max, nh3Extreme, hwVersion, fwVersion, lastDL, alertDuration, tentative
            
Level sensor WSSFC-ULC:
action, batteryLevel, error, alarm1, alarm2, distance, volumeRelative, distanceDiff, volumeRelativeDiff
            
Generic:
action, data
            
Enless Device:
action, statusContact1, statusContact2, lowBattery, frameType, temperature, temperature1, temperature2, tempThreshold, humidityThreshold, co2, humidity, firmware, pulse1, pulse2, counterContact1, counterContact2, lastMinCo2, co2samples
            
Analog GPS:
action
            
ST 580:
action, temperature, battery, storedEvents, rssi1, rssi2, hdop, gpsFixTime, delay, downlink, tagId1, tagId2
            
Level sensor DF550:
action, lowBattery, isTilted, isFull, highTemperature, distance, volumeRelative, distanceDiff, volumeRelativeDiff
            
VTag:
action, mac1, mac2, battery, magneticContact, magneticContactStatusChanged, temperature, beacon1, beacon2, txPowerBeacon1, rxRSSIBeacon1, rxRSSIBeacon2, forcedGPSScan, maxAcceleration, avgAcceleration, dl, firmware
            
Asset tracker:
action, mac1, mac2, battery, magnetReed, beacon1, beacon2, beacon3, rxRSSIBeacon1, rxRSSIBeacon2, rxRSSIBeacon3, status
            
ACS Padlock:
action, fn, userId, evtNb, lockStat, unlockStat, rtc, temperature, batteryLevel, statusDI1, statusDI2, statusDI3, statusMotfl, statusOseal, statusCseal, statusLock, statusDSeal, alarmDI1, alarmDI2, alarmDI3, alarmMotationStart, alarmMotionStop, alarmMoving, alarmResourceLimit, alarmLogFull, alarmCableRemovedWhileLocked, alarmCableCutWhileLocked, alarmLockFail, alarmCableDiodeProblem, alarmCableZoneChanged
            
Insafe+ Origin:
action, product, smokeHush, smokeAlarm, sensorTest, maintenanceTest, humidityRangeTest, temperatureRangeTest, energyStatus, maintenanceTime, eolCountdown, frame, dryAirRange, humidAirRange, dryAndHumidAirRange, optimalAirRange, minTemperature, maxTemperature, avgTemperature, minHumidity, maxHumidity, avgHumidity, hciGood, hciMedium, hciBad, airQualityLevel, airQualitySource, airAdviceShort, airAdviceLong, maintenanceStatus
            
Insafe+ Carbon:
action, product, co2, temperature, humidity, energyStatus, frame, airQualityLevel, airQualitySource, airAdviceShort, airAdviceLong, co2Level, drynessLevel, mouldLevel, dustmitesLevel, hci, hwError, liveTime, co2autocalibration, RTC_year, RTC_month, RTC_day, RTC_hours, RTC_minutes, co2-2, temperature-2, humidity-2, co2-1, temperature-1, humidity-1, measurementInterval, temp_th1_reached, temp_th2_reached, co2_th1_reached, co2_th2_reached, co2_th1, co2_th2, period1Start, period1Duration, period2Start, period2Duration, period1Active, period1Mo, period1Tu, period1We, period1Th, period1Fr, period1St, period1Su, period2Active, period2Mo, period2Tu, period2We, period2Th, period2Fr, period2St, period2Su, altitude, ledEnabled, buttonEnabled, realtimeEnabled, datalogEnabled, tempAlertEnabled, co2AlertEnabled, keepAliveEnabled, datalogDecimation, temp_th1, temp_th2, temp_delta, humidity_delta, co2_delta, keepAliveInterval
            
CO2:
action, temperature, humidity, co2, firmware
            
Door:
action, batteryLevel
            
Insafe+ Pilot:
action, product, temperature, humidity, energyStatus, frame, airQualityLevel, airQualitySource, airAdviceShort, airAdviceLong, drynessLevel, mouldLevel, dustmitesLevel, hci, hwError, temperature-4, humidity-4, temperature-3, humidity-3, temperature-2, humidity-2, temperature-1, humidity-1, measurementInterval, temp_th1_reached, temp_th2_reached, ledEnabled, buttonEnabled, realtimeEnabled, datalogEnabled, tempAlertEnabled, keepAliveEnabled, datalogDecimation, temp_th1, temp_th2, temp_delta, humidity_delta, keepAliveInterval
            
Manhole cover sensor:
action, batteryLevel
            
Airwits Detectify R4.0:
action, fwVersion, radioZone, hwVersion, deviceType, fwBuild, txVoltage, lastDL, messageCount, activityCount, totalActivityCount, stateChanged, stateActive
            
Water level sensor:
action, batteryLevel, status
            
Water depth:
action, batteryLevel, firmware, depth
            
HC ANA 4 - 20 mA:
action, current1, current2, current3, chlorine_free_ppm1, chlorine_free_ppm2, chlorine_free_ppm3, bromine_free_ppm1, bromine_free_ppm2, bromine_free_ppm3, ph1, ph2, ph3, redox_mv1, redox_mv2, redox_mv3, temperature_c1, temperature_c2, temperature_c3, turbidity_unf1, turbidity_unf2, turbidity_unf3, conductivity_us_cm1, conductivity_us_cm2, conductivity_us_cm3, flow_m3_h1, flow_m3_h2, flow_m3_h3, dry_contact1, dry_contact2, dry_contact3, pulse1, pulse2, pulse3, pressure_bar1, pressure_bar2, pressure_bar3, powerSavingEnabled, alarm
            
PeopleSense:
action, batteryVolts, total, increment, inactivityFlag, forcedDLFlag, temperature, frameNumber, deepSleep, crc16, reset, requestedDataId, requestedDataStart, requestedDataCount, wakeupTime, tempSamplePeriod, sensorSamplingPeriod, downlinkCheckPeriod, coldShutdownThreshold, coldShutdownHysteresis, allowedRetriesFromReset, resetRetryCount, negativeEdgeDetection
            
GL52S:
action, ackLength, commandId, insideGeo1, insideGeo2, insideGeo3, insideGeo4, insideGeo5, moving, connected, jamming, fixType, subPacket, battery, utcTime, altitude, azimuth, speed, protocolVersion, firmwareVersion, hardwareVersion, batteryVoltage, offset, daylightSaving, powerOnType
            
Sensatag WiFi:
action, mac, mac1, mac2, correct_format, message_type_changed, downlink_interval_changed, temperature_interval_changed, active_interval_changed, nonactive_interval_changed, xyz_threshold_changed, xyz_duration_changed, stop_delay_changed, temperature, temp1, temp2, temp3, temp4, temp5, temp6, temperature_min, temperature_avg, temperature_max, idleVoltage, txVoltage, x, y, z, movedToDifferentAP, APTimeDifference, tx
            
LevelSense:
action, motionFlag, inactivityFlag, overTempFlag, tiltedFlag, magSwitchFlag, ultrasonicHWErrorFlag, laserHWErrorFlag, accelerometerHWErrorFlag, ultrasonicDistance, ultrasonicDistanceErrorInvalid, laserDistance, laserDistanceError, laserDistanceErrorTooLong, laserDistanceErrorInvalid, laserReflectance, temperature, temperatureError, tiltAngle, tiltAngleError, tiltAngleErrorInvalid, batteryVolts, batteryVoltsError, fixTime, fixTimeErrorFault, fixTimeErrorTimeout, altitude, HDOP, remainingTestFrames, ultrasonicVariance, ultrasonicTransmissions, tiltRescheduleDelay, accWakeupThreshold, tiltThreshold, overTempThreshold, ultrasoundChangedThreshold, laserChangedThreshold, temperatureChangedThreshold, reflectanceChangedThreshold, GNSSFixPeriod, GNSSFixTimeout, GNSSRefinemenTime, normalGravVector, currentGravity, setNormalGravityVectorOnMagnet, setCurrentNormalToCurrent, GNSSOnTiltDetection, minimumDistance, maximumDistance, maxUSTransmissionDutyCycle, setUSGainMode, USGainProfile, deepSleep, reset, requestedDataId, requestedDataStart, requestedDataCount, wakeupTime, tempSamplePeriod, sensorSamplingPeriod, downlinkCheckPeriod, coldShutdownThreshold, coldShutdownHysteresis, allowedRetriesFromReset, resetRetryCount, volumeRelative
            
Orbit 3 R2:
action, temperature, humidity, error, battery
            
Dry contact:
action, batteryLevel
            
Orbit K R2:
action, temperature, cableConnected
            
Sensit v3:
action, status, mode, version, battery, temperature, humidity, brightness, double_press
            
Electronic seal:
action, num_of_starts, num_of_acc_alarm, num_of_fibre_alarm, num_of_recalibr
            
Orbit K R3:
action, temperatureInternal, temperature, battery
            
Orbit K R1:
action, temperature, cableConnected
            
Parking Pill:
action, msg_limit_reached, oob, mac_service, cmd_ok, intg_cmp, start_up, batteryLevel, park, temperature, count, res1, wdog, photo, criticalBattery, mag
            
Orbit 3 R1:
action, temperature, humidity
            
SiFi API 0.2:
action, battery, temperature, version
            
SimplePack 1.2:
action, status, temperature, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, vibration_value, vibration_detected, mode
            
SimpleLeak 1.0:
action, x, y, z, version, battery, temperature
            
SimpleLeak 3.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, vibratio_ratio_sum, counter, zone_new, zone_change_type, period, duration
            
SimplePack Plus Basic 3.0/4.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimplePack 2.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, vibration_value, vibration_detected, battery, temperature, mode
            
Xignal Mousetrap:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimplePack Plus Full 3.0/4.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimplePack Plus Wifi 3.0/4.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
Trap Connect:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimpleIndustry:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime, sensorType, calibrationType, channel, voltageMin, voltageAvg, voltageMax, voltage, temperature_min_1, temperature_max_1, temperature_min_2, temperature_max_2, flow_count_1, flow_count_2, legionella_risk_level_1, legionella_risk_level_2
            
Trap Connect Pro:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimpleIndustry Leak Rope:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimplePack Plus Door 3.0/4.0:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
SimpleMeter:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
Water leakage alarm:
action, batteryLevel
            
DeltaT Connect Pro:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime
            
PIR Motion Alarm:
action, batteryLevel
            
Smoke Alarm:
action
            
SimpleMeter CH4:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, gas_concentration, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime, sensorType, calibrationType
            
SiWa API 0.9:
action, battery, version
            
CO Alarm:
action, coValue, battery, sw_version, hw_version
            
SENSECOM-OMD-E:
action, period, tash, filtered, accOff, accSensitivity, firmware, fvm, acca, merr, ros, derr, dep, obis, valueT1, valueT2, valueP, serialNumber, consumptionT1Day, consumptionT2Day, consumptionPDay, consumptionT1Week, consumptionT2Week, consumptionPWeek, consumptionT1Month, consumptionT2Month, consumptionPMonth
            
Smilio:
action, batteryIdle, batteryTX, button1Counter, button2Counter, button3Counter, button4Counter, button5Counter, button1Pressed, button2Pressed, button3Pressed, button4Pressed, button5Pressed, frame20Settings, dtx, tpb, rnm, lwf, tpbq, endOfTpbCountdown, timeBetweenCodes, secondToLastCode, secondTolastCodeBadge, lastCode, lastCodeBadge, badgeUsed
            
RFID Reader:
action, battery, temperature, humidity, counter_read, counter_press, accelerometer_alarm, temperature_th_reached, humidity_th_reached, button4_pressed, button3_pressed, button2_pressed, button1_pressed, hw_version, fw_version, dn_version, rfid_tag
            
Tekzipark:
action, occupancyStatus, deflectionStatus, batteryStatus, beaconFound, temperature, deflection_value, beaconRSSI, beaconID
            
ST730:
action, temperature, battery_voltage, battery_level, mac, mac1, mac1_rssi, mac2, mac2_rssi, mac2nic, x, y, z, speed, fenceNumber, external_power, hall_sensor, firmware_version, trackingInterval, dataType, event, gpsNoFix, gpsFix, sleepNoFix, sleepFix, wifiBackup, checkInterval, forceDownload, checkEveryMessage, fence1, fence2, fence3, fence4, fence5, fence6, fence7, fence8, fence9, fence10, fenceStatus, fenceType, virtualIgnition, powerKeyEnabled, highSetPoint, lowSetPoint, debounce, trackingTimeout, thresholdOn, debounceOn, thresholdOff, debounceOff, fence1Enabled, fence1Vertices, fence2Enabled, fence2Vertices, fence3Enabled, fence3Vertices, fence4Enabled, fence4Vertices, fence5Enabled, fence5Vertices, sundayEnabled, mondayEnabled, tuesdayEnabled, wednesdayEnabled, thursdayEnabled, fridayEnabled, saturdayEnabled, startHour, startMinute, endHour, endMinute
            
Aquaponic PV:
action, temperature, ph
            
MultiGuard CO2:
action, temperature, humidity, co2, battery, voc, pressure, luminosity
            
Xtrak-R:
action, test_wifi, test_ble, test_nfc, test_sensor, test_acc, test_gps, test_sigfox, satNum, seq_number, battery, close_to_limit, paramInd, paramValue, data, maxTemp, minTemp, currTemp, maxHum, minHum, currHum, maxPress, minPress, currPress, powerDown, dl_ack, dl_msg_count, total_ul_msg, received_dl_cmd, prefixOrSuffix, ble, order, macOrSSID, mac, mac1, mac1_rssi, mac2, mac2_rssi, ssid, model, zone, firmware, tooHighTemp, humidityAlert, pressureAlert, shockAlert, lowBattery, reedStateChange, reedClose, tempAlert
            
PowerCoil:
action, phaseCount, I0max, I0med, I1max, I1med, I2max, I2med, Tmax, Tmed, totalPower, currentUnbalance, capacityInUse
            
XPress:
action, test_wifi, test_ble, test_nfc, test_sensor, test_acc, test_gps, test_sigfox, satNum, seq_number, battery, close_to_limit, paramInd, paramValue, data, maxTemp, minTemp, currTemp, maxHum, minHum, currHum, maxPress, minPress, currPress, powerDown, dl_ack, dl_msg_count, total_ul_msg, received_dl_cmd, prefixOrSuffix, ble, order, macOrSSID, mac, mac1, mac1_rssi, mac2, mac2_rssi, ssid, model, zone, firmware, tooHighTemp, humidityAlert, pressureAlert, shockAlert, lowBattery, reedStateChange, reedClose, tempAlert
            
SimpleMeter CO2:
action, status, x_min, x_max, x_fin, y_min, y_max, y_fin, z_min, z_max, z_fin, x, y, z, version, firmware, vibration_value, vibration_detected, battery, temperature, temperature2, extSwitchA, extSwitchB, extSwitchAError, extSwitchBError, mac, mac1, mac2, mac3, reed_on, light_on, humidity, dl_with_timestamp, hw_config_has_led, hw_config_has_leakage, hw_config_has_button, hw_config_accelerometer_type, hw_config_has_reed, hw_config_has_light, hw_config_has_beeper, hw_config_has_wifi, hw_config_temp_type, t0_closed, t0_open, t1_closed, t1_open, t2_closed, t2_open, t3_closed, t3_open, register_A_pointer, register_A_value, register_B_pointer, register_B_value, register_C_pointer, register_C_value, register_D_pointer, register_D_value, register_E_pointer, register_E_value, mode, resetDetail, mac_pointer, numberOfWifi, rssi_max_1, rssi_max_2, rssi_max_3, rssi_max_4, rssi_min_1, rssi_min_2, rssi_min_3, rssi_min_4, rssi_1, rssi_2, rssi_3, rssi_4, rssi_5, mac_pointer_1, mac_pointer_2, mac_pointer_3, mac_pointer_4, mac_pointer_5, counter, zone_new, zone_change_type, period, duration, activitylog_moving, activitylog_resting, activitylog_moving1, activitylog_resting1, activitylog_moving2, activitylog_status, gas_concentration, magX, magY, magZ, reed_off_duration, reed_on_duration, light_off_duration, light_on_duration, switch_a_off_duration, switch_a_on_duration, switch_b_off_duration, switch_b_on_duration, trackMe_movingTime, trackMe_restingTime, sensorType, calibrationType
            
XSense:
action, test_wifi, test_ble, test_nfc, test_sensor, test_acc, test_gps, test_sigfox, satNum, seq_number, battery, close_to_limit, paramInd, paramValue, data, maxTemp, minTemp, currTemp, maxHum, minHum, currHum, maxPress, minPress, currPress, powerDown, dl_ack, dl_msg_count, total_ul_msg, received_dl_cmd, prefixOrSuffix, ble, order, macOrSSID, mac, mac1, mac1_rssi, mac2, mac2_rssi, ssid, model, zone, firmware, tooHighTemp, humidityAlert, pressureAlert, shockAlert, lowBattery, reedStateChange, reedClose, tempAlert
            
Xtrak:
action, test_wifi, test_ble, test_nfc, test_sensor, test_acc, test_gps, test_sigfox, satNum, seq_number, battery, close_to_limit, paramInd, paramValue, data, maxTemp, minTemp, currTemp, maxHum, minHum, currHum, maxPress, minPress, currPress, powerDown, dl_ack, dl_msg_count, total_ul_msg, received_dl_cmd, prefixOrSuffix, ble, order, macOrSSID, mac, mac1, mac1_rssi, mac2, mac2_rssi, ssid, model, zone, firmware, tooHighTemp, humidityAlert, pressureAlert, shockAlert, lowBattery, reedStateChange, reedClose, tempAlert
            
Xtrak-S:
action, test_wifi, test_ble, test_nfc, test_sensor, test_acc, test_gps, test_sigfox, satNum, seq_number, battery, close_to_limit, paramInd, paramValue, data, maxTemp, minTemp, currTemp, maxHum, minHum, currHum, maxPress, minPress, currPress, powerDown, dl_ack, dl_msg_count, total_ul_msg, received_dl_cmd, prefixOrSuffix, ble, order, macOrSSID, mac, mac1, mac1_rssi, mac2, mac2_rssi, ssid, model, zone, firmware, tooHighTemp, humidityAlert, pressureAlert, shockAlert, lowBattery, reedStateChange, reedClose, tempAlert